Recent Posts

EM Microelectronic EM9304 A Tiny Low-Power Integrated Circuit (IC) Optimized for Bluetooth® 5.0   The EM Microelectronic EM9304 is a tiny, low-power, integrated circuit (IC) optimized for Bluetooth® 5.0 low energy enabled products. The flexible architecture of the EM9304 allows it to act as a companion IC to any ASIC or MCU-based product, or as a complete System-on-Chip (SoC). Custom applications can execute from one-time-programmable (OTP) memory, and digital peripherals (SPI or I2C) can be used to interface with external devices such as sensors, memory, display, or touch drivers. ARead More
All Sensors ADCA Series of Amplified Low-Pressure Sensors   All Sensors, a division of Amphenol Advanced Sensors ADCA series of amplified low-pressure sensors (0.25 inches of water column to 40 inches of water column) are based upon a proprietary technology to reduce all output offset or common mode errors. This model provides a ratio-metric 4-volt output with superior output offset characteristics. Output offset errors due to change in temperature, stability to warm-up, stability to long time period, and position sensitivity are all significantly reduced when compared to conventional compensation methods.Read More
a   The National Distributor Proudly Announces the Long-Awaited Partnership with By   Macro Sensors: LVDT’s: Macro Sensor LVDT’s cover a wide range of applications, including harsh environment projects, Macro Sensors’ PR 750 Series of 3/4″ (19 mm) diameter AC-Operated LVDTs are general purpose contactless linear position sensors for both OEM applications and end user requirements.   Gageheads: Robust Spring Loaded AC and DC Gage Heads for the toughest environments. These rugged hermetically sealed sensors are constructed entirely of stainless steel and intended for general industrial use. The coilRead More
Monolithic Crystal Filters 4 Poles in One 5.0 x 7.0 mm Surface Mount Package These monolithic crystal filters feature high quality resonators with sharp cutoff characteristics, low loss, good inter-modulation and a high stability over a wide temperature range. Product Description: • Frequency Range: 21.4 MHz ~ 45.0 MHz • 4 Poles in One Surface Mount Package • 5.0 x 7.0 x 1.3 mm, 6 Pads • Operating Temperature Range: -20° ~ 70°C Applications: • GPS • Communication Systems • Cellular & Cordless Phones • RF Applications • Radio BaseRead More
Barometric Pressure Sensor with Stainless Steel Cap from TE Connectivity   MS563702BA03-50 Download Datasheet The MS563702BA03-50 (MS5607-02BA) is a new generation of high-resolution altimeter sensors from TE (MEAS-SPEC Switzerland) with SPI and I2C bus interface. This barometric pressure sensor is optimized for altimeters and variometers with an altitude resolution of 20 cm. The sensor module includes a high linearity pressure sensor and an ultra-low power 24-bit ADC with internal factory calibrated coefficients.   Features: • High resolution module, 20cm • Low power, 1 µA (standby < 0.15 µA) • SupplyRead More
TDK InvenSense DK-20602 A Comprehensive Development Platform for ICM-20602   SmartMotion Platform: The DK-20602 is a comprehensive development platform for ICM-20602, a high-performance 6-axis motion sensor that combines a 3-axis gyroscope, and a 3-axis accelerometer. The ICM-20602 is the lowest cost version of the ICM-206xx series as it does not contain the DMP (Digital Motion Process). The platform designed around Microchip G55 MCU can be used by developers for rapid evaluation and development of ICM-20602 based solutions. The DK-20602 includes an on-board Embedded Debugger so external tools are not requiredRead More

Posted On March 5, 2019By Component Distributors Inc.In Ewave, Mitutoyo, Precision Measurement

Mitutoyo PH-A14 (172-810-10A)

Mitutoyo PH-A14 (172-810-10A) Profile Projector In-Stock Right Now at CDI. Buy Now at the Lowest Price in the Industry!   PH-A14 (172-810-10A) – ONLY ONE UNIT LEFT IN STOCK, FIRST COME FIRST SERVED! $4,900.00   And… Just Released… The Brand New 2D Touchscreen Featuring M2 Optical Measuring Software. Just add part# 64PKA156A, or 64PKA157A (with Edge Detection). Adding the 64PKA156 or 64PKA157 includes FREE ON SITE INSTALLATION AND CALIBRATION by the Mitutoyo Factory Professionals.   Also Available: QM Data 264-156A The QM-Data200 is a geometric readouts/analysis unit for optical instrumentsRead More
NEW! SM-UART-04L Particulate Dust Sensor   Telaire SM-UART-04L Particulate Dust Sensor is designed for a wide range of air quality applications where fine particle dust needs to be measured. Applications include air quality meters and air purifiers for both residential and light industrial monitoring and control. The optical design leverages laser technology, which allows customers to achieve excellent performance with balanced reliability. SM-UART-04L is an ideal solution for industrial and consumer applications.   Applications: • Indoor Air Quality Monitoring • Air Cleaners and Purifiers • Air Conditioners and HVAC •Read More
Introducing LED Retrofit NEMA-type Surge Protective Devices (SPD) from ABLE Power Products   The Retrofit surge line includes a Fast Plug-in SPD, a Shorting Cap SPD and a Photocontrol SPD, all equipped with an external ground wire for connection to the fixture housing, arm or pole and fits all standard 3-pin or 7-pin receptacles. Ideal for DOT’s, Municipalities, and Utilities that have identified high risk areas or troubled sites due to lightning issues or power related problems.   Surge Protection Features • 3-pin or 7-pin models available • UL 1449Read More
TDK InvenSense MPU-9250, 9-Axis Motion Sensor and NW-MOT-MPU9250 Break Out Board at CDI   TDK InvenSense recently stopped selling the very popular MPU-9250, 9-Axis Motion Sensor. However, if you still require a “few” devices to bridge the gap in order to get the new design in place check our remaining availability by clicking here.     In addition, Component Distributors, Inc. has lowered the price of the MPU-9250 break out board, NW-MOT-MPU9250. This break out board is available for only $7.50 each, while supplies last. If you are switching toRead More