Posted On April 25, 2019 By In Ewave, NotWired.CO, Sensors and Wireless And 492 Views

notWired.co Introduces the Latest TDK InvenSense Break Out Board NW-MOT-ICM42605

notWired.co

notWired.co Introduces the Latest TDK InvenSense Break Out Board
NW-MOT-ICM42605 for the Next Generation of Motion Sensors
the ICM-42605

 
notWired.co introduces their latest TDK InvenSense break out board, NW-MOT-ICM42605, for the next generation of motion sensors, the ICM-42605. The ICM-42605 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 2.5x3x0.91 mm (14-pin LGA) package. It also features a 2K-byte FIFO that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode.
ICM-42605 includes the following motion features, also known as APEX (Advanced Pedometer and Event Detection – neXt gen)
  • Pedometer: Tracks step count, also issues step detect interrupt.
  • Tilt Detection: Issues an interrupt when the tilt angle exceeds 35° for more than a programmable time.
  • Raise to Wake/Sleep: Gesture detection for wake and sleep events. Interrupt is issued when either of these two events are detected.
  • Tap Detection: Issues an interrupt when a tap is detected, along with the tap count.
  • Wake on Motion: Detects motion when accelerometer data exceeds a programmable threshold.
  • Significant Motion Detection: Detects significant motion if wake on motion events are detected during a programmable time window.
 
The host interface can be configured to support I3C slave, I2C slave, or SPI slave modes. The I3C interface supports speeds up to 12.5MHz (data rates up to 12.5Mbps in SDR mode, 25Mbps in DDR mode), the I2C interface supports speeds up to 1 MHz, and the SPI interface supports speeds up to 24 MHz.

The NW-MOT-ICM42605 provides an easy to use, low-cost, very small breakout board for the ICM-42605. All pins are mapped to standard 2.54mm/0.1” headers. This allows for use in a standard bread board or to be ‘wired’ into an application. The header-header spacing is 7.62mm (300mil).

 
About notWired.co
notWired.co is an engineering team with experience in complex embedded designs with expertise in Hardware/PCB, embedded firmware, Bluetooth/BTLE, WIFI, Mobile App Development, and PC App development. We can support your product from development to manufacturing in which we have extensive manufacturing relationships locally and overseas to support your needs.
About Component Distributors Inc.
Component Distributors, Inc. (CDI) is a value-added distributor of electronic components providing PowerLED Lighting SolutionsRF & MicrowaveSensors & Wireless Solutions, and Precision Measurement products for simple to complex system applications. CDI distributes globally and provides local customer service and application support across the Americas. CDI delivers technical solutions that are easy to find and easy to buy, providing customers and supplier partners with design services, web commerce enablement and flexible supply chain solutions.
Component Distributors, Inc. (CDI)
Click Here to Submit a Technical Inquiry
Toll-Free: 1-800-777-7334