NK Technologies Category


Posted On September 3, 2013By Component Distributors Inc.In Ewave, NK Technologies, Precision Measurement

DT 3-Wire Series, DC Current Transducer

The NEW DT 3-Wire Series DC Current Transducer from NK TechnologiesCDI announces the newest addition to NK Technologies, the DT 3-Wire Series. The DT 3-Wire Series is a DC current transducer, which is designed in a compact, space-saving case. The DT 3-Wire Series uses a common point for both power supply and output signal and is factory calibrated for a single current range. This 3-Wire method for DC current measurement keeps costs in check for projects where many sensors are needed. FEATURES: Industry Standard Outputs: 0-5 or 0-10 VDC proportionalRead More
NK Technologies, ATH Series Current Transducer with Time Integration CDI announces the NEW NK Technologies ATH Series Current Transducer, designed specifically for monitoring the power controlled by silicon controlled rectifiers (SCRs): phase angle fired, burst fired, or time proportioned. The ATH Series will provide an output signal directly proportional to the RMS amperage and will be accurate regardless of the AC current wave shape. FEATURES: Industry Standard Outputs: 4-20mA, 0-5 or 0-10 VDC. Externally Powered: 24 VDC or 120 VAC. Factory Calibrated: No need for zero and span adjustment potentiometers.Read More

Posted On March 11, 2013By Component Distributors Inc.In Ewave, NK Technologies, Precision Measurement

WRT Transmitter/Receiver – NK Technologies

Wirelessly Transmit Data 100 Meters Between Transceivers and Up to a Maximum of 800 Meters Away with the New WRT Transmitter/Receiver The New WRT Series Transmitter/Receiver provides self-managed mesh network that allows the system to function with high reliability. Over 40,000 units are currently in use in 10,000 sites worldwide. . . trouble free. No changes or cabling needed to add devices to existing networks, transparent to existing equipment. Transmit data 100 meters and up to 800 meters maximum with multiple hops.     Features: Can be configured as aRead More

Posted On January 31, 2013By Component Distributors Inc.In Ewave, NK Technologies, Precision Measurement

ADC Series 2013 Engineers’ Choice Awards Finalist

NK Technologies, ADC Series 2013 Engineers’ Choice Awards Finalist   CDI is proud to announce that NK Technologies ADC Series Signal Converter was chosen as a finalist in the Machine and Embedded Control – Discrete Sensors category for the 2013 Engineers’ Choice Awards. Winners will be announced in the February issue of Control Engineering.     FEATURES: Convert up to eight 4-20 mA sensor outputs using a single network address. Model configurations include: eight loop-powered (2-wire) or eight externally-powered (4-wire) or four of each type. Sensor loop power is suppliedRead More

Posted On October 29, 2012By Component Distributors Inc.In Ewave, NK Technologies, Precision Measurement

New ASL AC Current Operated Switch

ASL AC Current Operated Switch with Patent-pending Linear Adjustment Provides Precise Setpoint     The New ASL Series provide a current operated solid state contact powered from the monitored circuit. The trip point adjustment uses a single turn potentiometer. This means the installer can set the point where the output changes state when the monitored circuit is not energized, by turning the adjustment arrow to the current magnitude needed, and install the sensor over the conductor. Available in Solid-core or split-core case. FEATURES: Patent-pending, potentiometer setpoint selection Solid-state design meansRead More