Sensors and Wireless Category

MegaChips-2
MegaChips – EOL eDSP (MA6000 Sensor Fusion Product & Evaluation Board) Effective immediately, MegaChips USA has decided to remove the eDSP (the MA6000 sensor fusion product and evaluation board) product line from their product offer. All product has been returned to the vendor and Component Distributors does not have any stock of this product. If you require a contact at MegaChips, please feel free to contact your local Component Distributor’s sales person for details. Component Distributors, Inc. (CDI) www.cdiweb.com Click Here to Submit a Technical Inquiry Toll-Free: 1-800-777-7334Read More
TDK-FI

Posted On May 15, 2018By Component Distributors Inc.In Ewave, Sensors and Wireless, TDK InvenSense

TDK InvenSense End of Life (EOL) for the INMP-441

TDK InvenSense End of Life (EOL) for the INMP-441 (and all variants) MEMS Microphone TDK InvenSense has announced the End of Life (EOL) for the INMP-441 (and all variants) MEMS Microphone. The reason for EOL is due to assembly partner production and test equipment limitation. Component Distributors Inc. currently has some of the INMP-441ACEZ devices in stock, approximately 2500 pcs. When these devices are gone, no more will be available. Please click here for more information regarding the official EOL notice. A possible replacement part is the ICS-43434 Microphone. InRead More
Eddystone-FI-3
EM Microelectronic Introduces the EMBC01-Eddystone Beacon   EMBC01-EDDYSTONE The EMBC01-Eddystone beacons allow you to deploy your beacons once and use them many times over. Build highly personalized features into your app or use nearby notifications to deliver web or app content, with no prior app install required. The beacons themselves do not need programming and are ready to go! The EMBC01-Eddystone beacon firmware implements the standardized Eddystone UID, URL and TLM packet advertisements and allow for provisioning using the Eddystone Configuration GATT Service. Using the Google Eddystone provisioning service implementedRead More
FI-Sensors
Choosing The Proper Accelerometer For Measurement Success And Sanity from Sensors | Online Selecting the correct accelerometer technology for a measurement application is vitally important for obtaining accurate results. Your measurement results are only as good as your accelerometer selection criteria. In this article, we look at the different types of accelerometers available on the market, and the considerations around each type.   BASIC ACCELEROMETER TYPES In broad terms, accelerometers are classified into two categories: AC-RESPONSE and DC-RESPONSE. An AC-response accelerometer, as the name implies, is a sensor which hasRead More
SGX-FI
Introducing the SGX SensorTech EC410 Electrochemical Oxygen Sensor SGX electrochemical sensors detect gases by producing a chemical reaction between the gas and oxygen contained in the sensor. This reaction produces a small current, which is proportional to the concentration of the gas present. The sensor is, in effect, a type of fuel cell, hence all electrochemical oxygen sensors are of the self-powered, diffusion limited, metal-air battery type, comprising an anode, a semi-solid electrolyte paste and an air cathode. The cell comprises an enclosure containing two electrodes, a flat PTFE tapeRead More
Fanstel-12

Posted On March 2, 2018By Component Distributors Inc.In Ewave, Fanstel, Sensors and Wireless

Fanstel BC832 Bluetooth Low Energy (BLE) 5 Micro Module

Fanstel BC832 Bluetooth Low Energy (BLE) 5 Micro Module BC832 at CDI Download the Datasheet Component Distributors Inc. is proud to introduce the Fanstel BC832. The BC832 is a Bluetooth Low Energy (BLE) 5 with NFC module using Nordic nRF52832 SoC with a built an integrated chip antenna, with FCC certification (FCC ID X8WBC832). Size is critical for IoT applications and this micro sized module is 7.8×8.8×1.3mm. It has 16 castellated pins for applications needing a limited number of GPIOs. Additional 20 LGA (Land Grid Array) pins provide access toRead More
FI-Telaire-Spotlight
T9602 Humidity & Temperature Probe Download Product Spotlight (pdf) The Telaire T9602 is a unique over molded Relative Humidity and Temperature probe with IP67 protection. Highly competitive for customers considering designing RH/T products with environmental protection. Available as standard with 1 or 1.8 meter cable and JST connector. IP67 protection – Total protection from dust and immersion upto 1 meter of water.   Features: Fully Calibrated & Temperature Compensated ChipCap2 sensor Digital or Analogue Output IP67 Rated Precision & Accuracy (±2% RH, ±0.3°C, 14 bit) Low Current Consumption Reliable inRead More
SGX-1
SGX SensorTech MEMS Pellistor VQ548MP & VQ548MP-DA Pellistors are solid-state devices used to detect gases which are either combustible or which have a significant difference in thermal conductivity to that of air. The detecting elements consist of small ‘pellets’ of catalyst-loaded ceramic whose resistance changes in the presence of the target gas hence the term ‘pellistor’ being a combination of ‘pellet’ and ‘resistor’. The earliest form of catalytic gas sensor used heated bare coils of platinum wire to burn the gas. The heat generated by the burning process produced aRead More
FI-ICP-101xx
TDK InvenSense Introduces ICP-101xx Barometric / Altimeter Modules   TDK InvenSense has released the ICP-101xx pressure sensor family, based on MEMS capacitive technology which provides ultra-low noise at the lowest power, enabling industry leading relative accuracy, sensor throughput, and temperature stability. The first product is the ICP-10100 device. This pressure sensor can measure pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm, less than the height of a single stair step. This family also, consuming only 1.3 µA @1 Hz,Read More
TE-FI-1
MS8607 Digital Fusion Sensor from TE Connectivity Available at CDI   The MS8607 (part number MS860702BA01-50) is the novel digital combination sensor of MEAS providing 3 environmental physical measurements all-in-one: Pressure, Temperature, and Humidity (PTH). This product is optimal for applications in which key requirements such as ultralow power consumption, high PTH accuracy and compactness are critical. High pressure resolution combined with high PTH linearity makes the MS8607 an ideal candidate for environmental monitoring and altimeter in smart phones and tablet PC, as well as PTH applications such as HVACRead More