NK Technologies’ new APT Power Transducer measures three phases of current and voltage, and produces an industry standard analog signal proportional to the watts used. The monitor uses current transformers to measure the amperes, and the line voltage connects directly to the transducer, up to 600 VAC.
The APT power transducer can be configured to accept five amp secondary current transformers or the safer ProteCTTM low voltage output sensors. Either type of current sensing will produce an accurate output signal to help you identify areas of excessive energy consumption and allow intervention to reduce demand.
Features:
•
4-20 mA, 0-5 or 0-10 VDC Output
•
Externally Powered
•
Low Profile Reduces Cabinet Depth Requirements
•
Compact DIN Mounted Housing
•
Finger Safe Terminals Clearly Labeled for Quick Installation
Applications:
•
Measuring the power usage of a single piece of equipment, an area of a plant or the entire facility.
•
Detecting conveyor jams and overloads and checking that the belt is loaded properly.
•
Detecting dry run from clogged pump intake or discharge lines and monitoring impeller cavitation and bearing wear.