| |
| NW-MOT-ICM42688P and NW-MOT-ICM42686P |
 |
| Features: |
| • Ultra-small 16.3×13.8mm (0.59”x0.5”) breakout board with .1”/2.54mm header spacing that can be directly soldered into a prototype or used with a breadboard. |
| • 7.62mm (300mil) header-header spacing. |
| • All ICM-42688-P and ICM-42686 pins are mapped to header pins. |
|
|
| |
| About the NW-MOT-ICM42688P |
| This notWired breakout board is based on the TDK InvenSense ICM-42688-P a 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a small 2.5x3x0.91 mm (14-pin LGA) package. The ICM-42688-P features include on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features I3CSM, I2C and SPI serial interfaces, a VDD operating range of 1.71 V to 3.6 V, and a separate VDDIO operating range of 1.71 V to 3.6 V. |
|
|
| |
| About the NW-MOT-ICM42686P |
| This notWired breakout board is based on the TDK InvenSense ICM-42686-P, a 6-axis, single interface, MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a small 2.5x3x0.91 mm (14-pin LGA) package. It also features a 2Kbyte FIFO that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. The ICM-42686-P, with its 6-axis integration, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. |
|
|
| |
| About notWired.co |
| notWired.co is an engineering team with experience in complex embedded designs with expertise in Hardware/PCB, embedded firmware, Bluetooth/BTLE, WIFI, Mobile App Development, and PC App development. We can support your product from development to manufacturing in which we have extensive manufacturing relationships locally and overseas to support your needs. |
|
| About Component Distributors Inc. |
| Component Distributors, Inc. (CDI) is a value-added distributor of high-performance LED, Power, RF & Microwave, Wireless and Sensor component technologies. CDI distributes globally and provides local application support and customer service across the Americas. CDI delivers cutting edge power electronics by wrapping application support, development tools and design services around high-performance products from industry leading manufacturers. |
|
