NotWired.CO Category

TDK-NotWired-Header-FI
NW-MOT-MPU9250 Parts Offered for a Price of $6.00 Each While Available   TDK InvenSense announced the EOL for the MPU-9250 almost 1 year ago, but many customers are still trying to find a small number of this popular 9 axis DOF motion sensor to help bridge them over to the ICM-20948. Click here to view the TDK InvenSense whitepaper on the migration from the MPU-9250 to the ICM-20948. In addition, some customers that are using the MPU-9250, but not the compass, may also be able to use the MPU-6500 device.Read More
FI-NW
notWired.co Introduces the Latest TDK InvenSense Break Out Board NW-MOT-ICM42605 for the Next Generation of Motion Sensors the ICM-42605   notWired.co introduces their latest TDK InvenSense break out board, NW-MOT-ICM42605, for the next generation of motion sensors, the ICM-42605. The ICM-42605 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 2.5x3x0.91 mm (14-pin LGA) package. It also features a 2K-byte FIFO that can lower the traffic on the serial bus interface and reduce power consumption by allowing the system processor to burstRead More
notWiredCO-FI-1
TDK InvenSense MPU-9250, 9-Axis Motion Sensor and NW-MOT-MPU9250 Break Out Board at CDI   TDK InvenSense recently stopped selling the very popular MPU-9250, 9-Axis Motion Sensor. However, if you still require a “few” devices to bridge the gap in order to get the new design in place check our remaining availability by clicking here.     In addition, Component Distributors, Inc. has lowered the price of the MPU-9250 break out board, NW-MOT-MPU9250. This break out board is available for only $7.50 each, while supplies last. If you are switching toRead More
notWired-FI
notWired.co Introduces the CC2_Demo_BRD, a Humidity and Temperature Sensor   notWired.co introduces the CC2_Demo_BRD, a humidity and temperature sensor. This is a break out board for the Telaire, a division of Amphenol Advanced Sensors ChipCap 2 sensor, CC2D23. The CC2D23 sensor operates from 3.3 V power, is 2% accurate, and the output is digital I2C (There are a number of versions of this humidity and temperature sensor. Other versions of the ChipCap 2 sensor have 3% accurate analog outputs and have a sleep mode). In addition a SIP version isRead More
notWired-1

Posted On February 11, 2019By Component Distributors Inc.In Ewave, NotWired.CO, RF-Microwave

notWired.co NW-PA0616-20-P RF Amplifier

notWired.co NW-PA0616-20-P RF Amplifier 20W Pulsed Power PA 600 MHz – 1.6 GHz Pulsed   The NW-PA0616-20-P utilizes industry leading GaN technology and cutting-edge control circuitry to create a high fidelity, high performance broadband RF amplifier capable of producing 20W of pulsed power from 600MHz to 1600MHz. The NW-PA0616-20-P only needs 1us of settling time to be ready for RF drive and amplifier shutdown will be achieved in less than 1us after the TTL gate has been removed. The NW-PA0616-20-P is suitable for use either as a final stage amplifier,Read More
notWired
notWired.co NW-ENV-ICP10100 Barometric (Altimeter) Pressure Sensor   NW-ENV-ICP10100 Download Data Sheet ICP-10100 DK-10100 notWired.co has introduced their newest break out board, NW-ENV-ICP10100, barometric (altimeter) pressure sensor. Based on the TDK InvenSense ICP-10100 pressure sensor, this family of sensors are based on MEMS capacitive technology which provides ultra-low noise at the lowest power, enabling industry leading elative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm, less than the heightRead More
CDI-ValuePack-FI
CDI Clearance and Special Offers on notWired.co Value Packs     Component Distributors Inc. (CDI) is introducing two special part numbers the NW-369-VALUEPACK and the NW-69-VALUEPACK. These products consist of 3, 6, or 9-axis breakout board and are intended for individual testing of various types of InvenSense motion tracking sensors. Whether you’re testing the motion sensors for the first time or looking to determine if a 6 or 9-axis device is best for your design, these packages offer the breakout boards for one low price. All of the notWired.co breakoutRead More
FI-NW-2
notWired.co NW-AUD-ICS52000 Breakout Board for the InvenSense ICS-52000 MEMS Microphone with TDM Output     The ICS-52000 is the latest new product release for the InvenSense line of low-noise microphones with a TDM output, bottom-side audio port, and digital output. The complete ICS-52000 solution consists of a MEMS sensor, signal conditioning, an analog-to-digital converter, decimation and anti-aliasing filters, power management, and an industry standard 24-bit TDM interface. The TDM interface allows an array of up to 16 of the ICS-52000 microphones to connect directly to digital processors, such as DSPsRead More
FI-notWired
CDI is Proud to Introduce notWired.co to it’s Sensors and Wireless Group     Component Distributors Inc. (CDI) introduces notWired.co, the latest vendor addition to our Sensors and Wireless Solutions Group. notWired.co is a partner company with Component Distributors and makes break out boards, embedded sensor and wireless systems and offers custom design services. The first products being introduced are break out boards for the InvenSense MotionTracking™ devices:   notWired.co P/N InvenSense P/N Description NW-MOT-ICM20602 ICM-20602 Break out board for the 6-axis, ICM-20602, Low-Power, High-Performance Integrated 6-Axis MEMS MotionTracking™ DeviceRead More