All posts by Component Distributors Inc.

TE-FI

Posted On November 15, 2018By Component Distributors Inc.In Ewave, Sensors and Wireless, TE Connectivity

M3200 Pressure Transducer from TE Connectivity at CDI

M3200 Pressure Transducer from TE Connectivity at CDI   M3200 Series at CDI Download Data Sheet TE offers the M3200, the latest in a long line of pressure sensors designed and manufactured using our Microfused™ technology which is ideally suited for HVAC and refrigeration systems. While a range of board mount pressure sensors are used in HVAC systems for filter monitoring as well as pressure monitoring throughout a forced air system, the bulk of the pressure sensing is accomplished using heavy duty pressure sensors to monitor refrigerant pressure in compressor-basedRead More
Tech-Tip-#2
Surge Protection for LED Lighting Tech Tip #2 from ABLE Power Products   UL 1449 Voltage Protection Rating (VPR) As defined by NEMA: A rating per the latest revision of ANSI/UL 1449, signifying the "rounded up" average measured limiting voltage of surge protective device (SPD) when the SPD is subjected to the surge produced by a 6 kV, 3 kA 8/20 µs combination waveform generator. VPR is a clamping voltage measurement that is rounded up to one of a standardized table of values. The standard VPR ratings include 1000, 1200,Read More
Skyworks-FI-1
Skyworks Ramps LoRa-based Solutions for High Growth Internet of Things Applications Collaborates with Semtech to Enable Long-range, Energy Efficient Systems MUNICH–(BUSINESS WIRE)–Nov. 14, 2018– Skyworks Solutions, Inc. (NASDAQ: SWKS), an innovator of high performance analog semiconductors connecting people, places and things, today announced that Semtech (NASDAQ: SMTC) is leveraging its newest suite of low-power, wide-area network (LPWAN) products. Specifically, Semtech is integrating Skyworks’ advanced front-end solutions with their next generation LoRa® devices and wireless radio frequency technology (LoRa Technology) for picocell gateways. Skyworks’ industry-leading modules quadruple the operating range, supplyRead More
ELVR-Series
All Sensors ELVR Analog and Digital Low Pressure Sensor Series   ELVR Series at CDI Download the Datasheet All Sensors introduces the ELVR series of pressure sensors for monitoring pressure ranges from +1 inch water to +30 inches of water. The ELVR sensors can communicate directly with microcontrollers, eliminating the need for additional A/D converters. Product highlights include an I2C or SPI interface, an analog 0.5 to 4.5V output signal, and significantly reduced position sensitivity. Operating at a low supply voltage (3V or 5V), the ELVR series is well suitedRead More
SGX-FI
Introducing the NEW NGM_1 SGX Sensortech Battery Operated Module for Natural Gas Detection   Click Here to Find the NGM_1 at CDI Download the NGM_1 Data Sheet Natural Gas Module Application Note The NEW NGM_1 from SGX Sensortech is a natural gas module, battery operated detection device designed for detection of natural gas (methane) in concentrations below 100% LEL (4.4% CH4 in air). This module is not suitable for propane and butane detection. The sensor is equipped with a test button as well as an audible alarm option realized withRead More
FI-2

Posted On October 25, 2018By Component Distributors Inc.In Ewave, Precision Measurement, Schaevitz

2018 OEM Position Feedback Sensor Design-In Special at CDI

CDI Precision Measurement and TE Connectivity are Proud to Announce the 2018 OEM Position Feedback Sensor Design-In Special!!   This series of three monthly announcements will each feature a TE Connectivity OEM sensor for new design applications. New OEM designs around these TE Connectivity sensors will receive very specialized pricing and inventory stocking programs from Component Distributors. In addition, your design will be registered by CDI and TE Connectivity, our vendor partner. This Month’s Featured Sensor is the Dog 1 and Dog 2 Series of OEM Tilt Sensors and Inclinometers.Read More
Audax-Electronics-FI
AUDAX 2018 Portfolio of Products Available at CDI   Component Distributors Inc. is an authorized distributor of AUDAX Electronics LED Light Engines and Modules. AUDAX products are used in a variety of lighting applications including decorative, industrial, roadway, commercial, horticulture, refrigeration and automotive. You can click through to one of these four product families on our website or download the full PDF catalog by clicking here. You can also submit a quote request here. AUDAX Products are Made in Brazil and 100% Tariff Free! LED Light Engine LED SMD ModuleRead More
LensVector-FI
LensVector Extends its Reach in Lighting with Component Distributors, Inc. as Americas Distribution Partner   LensVector and CDI will accelerate adoption of Dynamic Beam Shaping. SAN JOSE, Calif., October 17, 2018 — LensVector and Component Distributors, Inc. (CDI) have announced a new franchise agreement that will extend availability of LensVector’s Dynamic Beam Shaping Lenses to luminaire manufacturers throughout the Americas. “Working with CDI makes it easier for luminaire manufacturers around the world to access our lenses and implement Dynamic Beam Shaping,” said Brent York, President and CEO of LensVector. “CDIRead More
Linx-FI
CER Series Ceramic LTE Chip Antenna from Linx Technologies The CER Series Ceramic LTE Chip Antenna from Linx Technologies is a compact, high-efficiency antenna designed to be easily integrated into wireless telecommunication devices. Operating in all common 4G/3G/2G LTE bands, it has better efficiency and gain at lower cellular bands compared to competitive products, providing enhanced performance for NB-IoT (Narrow Band Internet of Things) and CAT-M1 applications.   CER Series Ceramic LTE Chip Antennas at CDI ANT-LTE-CER-B (Supplied in Cut Tape) ANT-LTE-CER-T (Tape and Reel of 450 pieces) AEK-LTE-CER (EvaluationRead More
Linx-Technologies-FI
Component Distributors, Inc. is Excited to Serve as a Franchised Distribution Partner for Linx Technologies in North America     Linx Technologies a Merlin, OR based developer and manufacturer of antennas is pleased to announce that Component Distributors, Inc. (CDI) is the newest distributor of Linx solutions. Focused on RF, Microwave, and wireless solutions, CDI delivers technical solutions that are easy to find and easy to buy, providing customers and supplier partners with design services, web commerce enablement and flexible supply chain solutions. “We’re very excited to welcome CDI asRead More